Basic Operations; Watching A Tv Program; Setting The Sleep Timer - Aiwa TV-C1300U Mode D'emploi

BASIC OPERATIONS

Watching a TV program

POWER
PREV. CH
CHANNEL i/k
VIDEO AUDIO VOLUME
PHONES
TV/VIDEO
VIDEO INPUT
Earphone jack
CHANNEL N/M
VOLUME + /–
1
Press POWER to turn on the TV.
2
Press CHANNEL i/k repeatedly or the
number buttons to select the channel number.
When you use the number buttons, press the button as
follows:
Example
To select the channel 7, press 0 then 7.
To select the channel 77, press 7 then 7.
To select the channel 107, press +100, 0 then 7.
3
Press VOLUME + /– to adjust the volume.
To turn off the TV
Press POWER.
To mute the volume
Press MUTE. "MUTE" apperes for a few seconds.
To restore the volume, press MUTE or VOLUME + /–.
To recall a previous channel
Press PREV.CH to switch back and forth between the
current channel and the previous one.
9
ENGLISH
SLEEP
Number
buttons
MUTE
VOLUME + /–
CHANNEL
POWER
STANDBY
POWER
Tip
To listen through the earphone, insert an earphone (not
supplied) with a monaural mini plug into the earphone jack on
the front. The sound from the TV speaker is muted.
Note
The power automatically turns off approximately 15 minutes
after a television station has stopped broadcasting.

Setting the sleep timer

Press SLEEP repeatedly to select the number of
minutes after which to turn off.
The minutes change up to 120 minutes as follows.
OFF 15 30
SLEEP 30
After the set amount of time has elapsed, the TV turns the
power off.
To check the remaining sleep time
Press SLEEP once. The remaining time appears on the
screen.
To cancel the sleep timer
Press SLEEP repeatedly until "SLEEP OFF" appears.
Note
The remaining time appears automatically 5 minutes and 1
minute before the TV turns off.
For example, 5 minutes before turning off, "SLEEP 5" appears.
60 90 120