Playing Discs - Aiwa VX-F20DV1U Mode D'emploi

Playing discs

1
Load the disc(s).
2
Press c.
Playback begins with the disc on tray 1.
For a DVD or a VCD with the PBC function, you
do not need to press c . Playback star ts
automatically when the disc is loaded.
• When playing back DVDs or VCDs that support
PBC, the unit plays only one disc on tray 1.
• When playing back audio CDs, the unit plays all
discs in the disc compartment.
DVD:
Tray number of the
current disc
Video CD with PBC:
Video CD without PBC:
Audio CD:
To play just one disc
Press the DISC DIRECT PLAY buttons (1 to 3) for your
desired disc. These buttons (1 to 3) correspond to the
three discs trays (1 to 3).
Or press DISC on the remote control, then press
numbered buttons (1-3) to select a disc.
Press the disc number within 3 seconds after pressing
DISC. The selected disc is played once. If you press
the same DISC DIRECT PLAY button (1 to 3) during
an audio CD playback, the unit returns to all disc
playback mode.
All manuals and user guides at all-guides.com
Type of disc: DVD
Stopping and Pausing
To stop playback
Press s.
Playback stops. The unit remembers the point at which
playback stopped.
To resume playback from the point where it
stopped
Press c.
"RESUME" appears on the TV screen and playback
starts where it last stopped (Resume function).
To clear the point to be resumed
Press s again during stop.
"RESUME OFF" appears on the TV screen. The resume
memory is cleared, and playback starts at the beginning
of the disc when c is pressed.
To pause playback
Press a.
To resume playback, press c.
About the Disc Resume
This function is very useful to switch back and forth
between the TV mode and DISC mode.
Even if you change to a TV program during playing back
a DVD by pressing s and TV/VIDEO, you can playback
the DVD from the point where it stopped before.
Additionally, this unit maintains the resume data of up
to 5 DVDs and up to a total of 10 VCDs and CDs, even
if the unit is turned off.
The default setting of disc resume is OFF. Under the
default setting, the point to be resumed is cleared when
the disc tray is opened, the current disc is switched, the
power is turned off, or the function is switched. To turn
on the disc resume, See "DISC RESUME" (page 61).
Notes
• The resume function is not available for VCD playback
when the PBC function is turned on. To turn off PBC,
see "Playing a VCD without using playback control"
(page 37).
• When the 6th DVD or the 11th VCD or CD is inserted,
the resume data for the oldest disc is overwritten by
the disc information of the new disc, even when disc
resume is set to OFF.
35
ENGLISH