Tools Required - R&G ABCP0311BK Instructions De Montage

TOOLS REQUIRED


Socket set to include a 17mm A/F socket and a 8mm hex socket and wrench.

Set of metric Allen keys to include 5 and 8mm A/F.

Torque wrench (up to 40Nm).
LEGEND
Page | 3
ITEM 1 = SB087 SPANNING BAR (400mm LONG) (x1).
ITEM 2 = M0295 MOUNTING SPACER L-H-S (111.5mm LONG) (x1).
ITEM 3 = B0061 with CS341 (10mm) (BOTH CRASH PROTECTORS) (x2).
ITEM 4 = SB085 CRASH PROTECTOR SPINDLE BAR L-H-S (205mm LONG) (x1).
ITEM 5 = M10 PLAIN WASHERS (x2).
ITEM 6 = LW0001 (M12 SHAKE PROOF WASHERS) (x2).
ITEM 7 = M10x1.25 NYLOC NUTS (x2).
ITEM 8 = BC0002 CRASH PROTECTOR CAPS (x2).
ITEM 9 = M8x20mm LONG BUTTON HEAD BOLTS (x2).
ITEM 10 = M8 WASHERS (x2).
ITEM 11 = M0296 MOUNTING SPACER R-H-S (105mm LONG) (x1).
ITEM 12 = SB086 CRASH PROTECTOR SPINDLE BAR R-H-S (200mm LONG) (x1).
PICTURE 'D' PICTURE 'E'
PICTURE 'F'
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com