Using The Apps „Fitshow" & „Kinomap - Skandika STYRKE Instructions De Montage Et Mode D'emploi

Using the apps „Fitshow" & „KinoMap"
The computer can be connected via Bluetooth
1) Fitshow
Turn on Bluetooth on your mobile device, download the app and install it on your iOS or Android
®
device. You can find the app through your device's app search feature. After successful installation, you
can launch the app on your mobile device.
To record training data, you need to register in the app. However, a simple training without permanent
data recording is also possible without registration.
To start a workout with the app, you must first activate the Bluetooth
(press the „Bluetooth" button) - the Bluetooth
If you are not registered, a corresponding message may appear.
Confirm by tapping „Continue". Now you can start training and the corresponding data will be dis-
played in the app (see figure next page), while the device computer only displays the Bluetooth
If your device's training computer is not found, please check if Bluetooth
device and on your mobile device.
to communicate with the apps Fitshow or KinoMap.
®
icon appears on the display.
®
1.
Tap on „Sport"
and „Indoor"
2.
Tap on
„Start"
function of the device computer
®
is enabled on your training
®
icon.
®
33