Assembly Instructions - Skandika STYRKE Instructions De Montage Et Mode D'emploi

Assembly instructions

Rear spacer
Allen key
4 x Screws „B"
Step 1
We recommend to set-up the device with the assistance of a second person to avoid injuries and
damages.
Connect the rear spacer and the rails with 4 screws "B" as shown.
Seat
Step 2
Place the seat assembly onto the rails as shown.
Pay attention, that the larger vertically mounted wheels (the load wheels) are placed onto the plas-
tic extrusions on top of the rails and the smaller horizontally mounted wheels (the guide wheels)
are placed between the rails.
24