Using Apps - Skandika Styrke II Mode D'emploi

SKANDIKA TRAINING DATA APP
Turn your smartphone or tablet into a modern Styrke II training computer
with the Skandika Training Data App. Download the app either via the search
function of your app store or by scanning the QR code and then install it on
your iOS or Android device. After successful installation, start the app on
your mobile device.
In order to record training data, the Styrke II must first be connected to the app. For iOS, make sure the Bluetooth
connection is switched on. For Android, both the Bluetooth connection and location connection must be switched
on.
As soon as the Styrke II is connected to the app, it appears under „My devices"
(see adjacent figure).
To start training, select the Training tab and tap on „Start training".
If there are problems with the connection, the following steps may help:
1. Make sure the Bluetooth and location settings are activated in the device
settings of the smartphone or tablet. For Android devices, „Wi-Fi scanning"
and „Bluetooth scanning" must also be activated in the location settings.
2. Restart the Bluetooth adapter by removing the batteries and then reinserting
them.
3. Make sure the Styrke II is not connected to any other apps (such as Kinomap).
4. Update the app to the latest version.
5. Replace the batteries in the Bluetooth adapter if they are flat.
40

USING APPS

Tap
1
„Add new
Styrke II".
As soon as
the app has found
the Styrke II,
select it by tapping it.
2