Removing And Cleaning The Inside Oven Fan; Replacing The Oven's Light Bulb - steel Ascot Série Manuel D'utilisation

15.3 Removing and cleaning the inside oven fan

The inside fan of the ventilated oven may require periodic cleaning. To disassemble the fan
proceed as follows:
•
•
•
•
•
•
Re-fit the fan and the cover by working in the
inverse direction to the instructions for removal.

15.4 Replacing the oven's light bulb

Before carrying out maintenance, switch off the power supply to the appliance.
Proceed as follows:
•
•
•
•
162
Instructions for the user
Make sure that the power supply to the appliance is switched off.
Remove all inside components (racks and dripping pans).
Loosen and remove the four screws A from the cover panel.
Remove the cover panel B.
Use a coin to loosen the fixing nut C of the fan (this threading is inverse; to loosen turn
clockwise).
Remove the fan D and wash it by immersing
it in warm water and dish detergent. Never
use abrasive or corrosive detergents,
powdered products, or metal scrubbers.
Rinse the fan and dry it thoroughly.
open the oven door;
unscrew the glass safety cap anticlockwise;
unscrew the bulb and replace it with another one for high
temperatures (300°C) with the following characteristics:
Voltage
Power
Attachment
Refit the glass cap and switch on the power. It is possible to check that the oven light is
working even when the door is closed by turning the function switch knob to position
230 V / 50 Hz
25 W (halogen bulb)
G9
.