Cleaning And Maintenance - EUROM Q-Time 2001 Manuel D'utilisation

Use
To use the heater, if required insert the plug into the socket and pull on the pull
switch. Each time that you pull the pull switch, the heater will change to the next
setting:
0 (off) > 1 (650W) > 2 (1300W)
You are able to view the heater's setting through the peep hole.

Cleaning and maintenance

Before you perform maintenance on the heater, you have to turn off the power
supply.
This heater does not require any specific maintenance. Keep the ventilation and
radiation openings, as well as the heat screen, clean and dust-free, but when
cleaning the quartz elements, make sure that you do not touch them; it is best to
blow any dust away frequently.
To clean the exterior, use a soft cloth which can be damp. At the very most, use a
mild cleaning agent: no abrasives or sponges and no caustic substances.
If a defect occurs, disconnect the heater from the power supply and go to a service
point. Do not perform any repairs yourself and always ask that original parts are
used in any repairs.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should be
made suitable for reuse in order to prevent any adverse effects to
health and the environment caused by unregulated waste collection.
Therefore, please make sure that you bring old equipment to a
designated collection point. Alternatively, contact the original
supplier, who can make sure that as many of the components as
possible can be recycled.
> 3 (2000W) > 0 etc.
25