Cleaning And Maintenance - EUROM Safe-T-Kamin 2000 Manuel D'utilisation

 Pressing the display x2 (high heating power) shows
symbol
 Pressing the display x3 (returns to ventilation) shows the fan symbol
 The heater will now continue to operate continuously at this power setting.
3. To run the heater on the thermostat, press the
temperature to 18-45°C.
(On the remote control, press
temperature.
Caution: Once the set thermostat temperature is reached, the heating element
turns off and the fan remains switched on. When the ambient temperature
drops below the thermostat temperature, the heater resumes operation.
4. The heater will operate at high heating power when the ambient temperature is
more than 3°C lower than the set temperature.
5. The heater will operate at low heating power when the ambient temperature is
more than 1-3°C lower than the set temperature.
6. Press on the
stop the oscillation (swinging).
7. Press the
ambient fire.
8. Press the Timer button
will switch itself off: press x2 for 1 hour, press x3 for 2 hours, etc. up to a
maximum of 8 hours. The display shows the Timer symbol.
9. Press the
10. The heater will continue for 30 seconds after turning off. The display counts
down the seconds.
11. To turn off the heater, press the main switch to O (off) before removing the
plug from the socket. Always unplug the appliance when the heater is not in
use!

Cleaning and maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do

not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Using a vacuum cleaner, carefully remove any dust and dirt from the grills and

ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
.
button and the heater will oscillate (swing). Press again to
button to turn on the ambient fire; press again to turn off the
to set the number of hours after which the heater
button to stop the heater.
first and then the + and - buttons to set the
37
and the fan
button to set the desired
.