Cleaning, Maintenance And Service - EUROM 33.394.7 Manual D'instructions

To switch it off, set the switch on the device back to 0. Then cut the power
supply using the external switch or take the plug out of the socket.
If you are using the device for the first time (or when it has not been used for a
while), you must keep a close eye on it for the first 20-30 minutes to ensure that it
is working correctly. During initial use (and if the unit has not been used for a long
period), white smoke may be emitted from the device. This is normal and will stop
after a few minutes. During the warm-up period, the unit may sputter; this is
nothing to worry about.

Cleaning, maintenance and service

It is important to clean the device regularly particularly if it hangs outdoors.
Cleaning extends the life-span of the device and ensures it works effectively. It is
also a condition of the guarantee.
Clean the device every 2-3 weeks (depending on the environment); clean weekly in
a salty environment. Salt in the air can penetrate the device and lead to rusting or
erosion of the metal. In an urban environment, air pollution can also impact upon
the coating and other materials which protect the device from rust and erosion.
You must thoroughly clean and inspect the device once every 3 months.
Be aware that, despite regular cleaning, the effects of weather, air pollution and
salt, cigarette smoke, oil lamps, candles, barbecues etc. will leave their mark on
the device over time.
Please note! Always turn the device off, take the plug out of the socket and leave
the device to cool (1 hour) before cleaning.
The fact that the device is protected by IPX4 means that it can safely be cleaned
with (warm) water. Do not use a pressure sprayer or similar; only use a wet cloth.
If you use a mild cleaning agent, make sure that all of the residues are removed
properly!
Dust the device with a clean, soft, lint-free cloth or soft brush. Do not use
aggressive cleaning agents, scouring sponges, brushes or chemical cleaners as this
could damage the materials. Never use flammable cleaning products such as
benzene or methylated spirit. Keep the cable and plug dry.
Do not forget to clean the back of the device: insects, bird faeces, dust, salt and
other dirt may gather here!
Check the device for damp and deficiencies before using again. Check the device
regularly and always do so after high winds or unusual events that may impact
upon the heating panel.
There are no components within the device that need maintaining or
replacing/repairing by the user. Any repairs must be carried out by trained
specialists (supplier or authorised electrician) to ensure safety.
Damage and breakdowns as a result of repairs made by the user or changes made
to the device, accidents, misuse, negligence, incorrect/inadequate maintenance and
commercial usage shall make the guarantee null and void.
48