Order Information; Guidelines And Standards Complied With - ProMinent DULCOTEST OZE Mode D'emploi

Disposal / Order information / Guidelines and standards complied with
Sensor
IMPORTANT
• Please observe the applicable national regulations.
• You may return the decontaminated used equipment to ProMinent

13 Order information

Standard scope
of delivery • 1 Sensor including diaphragm cap and tensioning ring
• 1 Bottle of electrolyte
• 1 Operating instructions
• 1 Screwdriver
Complete kit The sensors may only be ordered as complete kits:
OZE 3-mA-2 ppm
Consumables • 1 Bottle of electrolyte (100 ml)
• 1 Diaphragm cap
Accessories • Measuring and control unit
• Assembly kit
• Two-wire measuring line (2 x 0.25 mm
• Photometer DT 1 for DPD test
• DULCOMETER
• Sampling cock 25 mm
• 1 Bypass fitting (application in case of gas bubbles

14 Guidelines and standards complied with

EC Declaration
of Conformity The sensor was developed and tested in agreement with valid European
standards and guidelines. The production is subject to a high quality
standard which is assured by European standards and guidelines.
A corresponding declaration of conformity may be requested from ProMinent.
ProMinent ®
Dosiertechnik GmbH, Heidelberg, against prepaid postage.
DULCOMETER ® D1C Ozone
for DGM
for DLG III
® Simulator
in sample water)
Order no. 792957
Order no. 506273
Order no. 790488
via identcode
(see product
catalogue)
Order no. 791818
Order no. 815079
2
, Ø 4 mm) Order no. 725122
Order no. 1003473
Order no. 1004042
Order no. 1004739
Order no. 1017912
39