Table des Matières
Publicité
Storage
and care
To protect the loupe component
against damage, the Head-worn
Loupe LC should always be stored
in its accompanying case. To insert
it in the case simply fold the Head-
worn Loupe LC.
The Head-worn Loupe LC does
not require any special care. Any
dirt on the visor or headband can
be removed in the usual way.
However solvents, caustic cleaning
agents or scouring powders must
not be used.
To clean the loupe compo-
nent, please use a clean, soft
and fluff-fre cloth. To prevent
scratching by dust particles, we
recommend holding the optics
under running, hand-hot water.
Glass cleaning agents or similar
gentle cleaning agents can also
be used. Washing-up liquids must
not be used as they can lead to
tears in the surface of the loupe
component!
31
Publicité
Table des Matières
