Table des Matières
Publicité
Mounting the clip
on your Glasses
Open the clip by pressing the
gripping surfaces (1) together.
Then guide the pegs from above
over the bridge of your glasses
onto the lenses. Lock the clip on
your glasses by releasing the grip-
ping surfaces. Only the protective
caps of the clip pegs should be in
contact with your lenses.
For comfortable vision, the Head-
worn Loupe LC must be mounted
horizontally and symmetrically to
the centre of your glasses. If you
see double images through the
loupe component, please re-check
the fit of the clips on your glasses.
The angled gripping surfaces allow
the Head-worn Loupe LC to be
mounted on your glasses while
you are still wearing them. The
best way of mastering this tech-
nique is by practicing for a short
time in front of a mirror.
13
Publicité
Table des Matières
