Table des Matières
Publicité
Vertical positioning
and tilt of the loupe
component
Adjust the carrier arm until the
loupe component is set at a height
which allows you to work with
a comfortable head and body
posture. If aberrations such as
distortion and color fringes occur
when you are looking through
the loupe component, tilt the
optics (4) until these aberrations
disappear.
If you do not require the Head-
worn Loupe LC for short periods
of time, there is no need to
remove it from your glasses.
Instead, simply swing the carrier
arm (3) upwards.
19
Publicité
Table des Matières
