schmersal SLC 415 Instructions De Montage Et De Raccordement page 57

STATUS INDICATIONS
EMITTER SIGNALS
At power-on, all the LEDs are ON for 5 seconds.
Subsequently, the LEDs display functioning condition.
SLG 415 L - SLG 415 T SLC/SLG 415 I
Figure 23
MEANING NORMAL
LED COLOR
FUNCTIONING (LED ON)
Light curtain / -grid under test YELLOW
Test
Light curtain / -grid functioning GREEN
Fault detected RED
High range selected ORANGE
RANGE
Table 3
If a fault is detected, the LED will indicate the type of alarm (see "TROUBLESHOOTING").
17