Opening the door
The door can be opened by unscrewing the screws as shown on the image below.
Watch out for nger marks!
!
Make sure to leave no nger marks on the cleaned glass pane when you close the hearth door. Finger
marks leave stains which will burn in the glass.
Placing the hearth
•
The appliance must be placed on a oor that is solid enough to hold it.
•
It is forbidden use and/or to place ammable materials, such as curtains, in the vicinity of the appliance; it is
safe to keep them at a distance of at least 1.5m.
Mounting the collar shaft
Depending on the length and the form of the concentric duct
system Ø 80 - Ø 150 mm and the outlet construction, you must
mount a collar shaft with a diameter of Ø 50mm according to the
tables on page 25. The standard passage for ue gases is Ø 80 mm
on the upper side of the combustion chamber.
Ensure that the collar shaft is properly tted. Fitting the
!
collar shaft incorrectly may cause defects to the appliance.
All manuals and user guides at all-guides.com
27