Publicité
Both sides of the vehicle
5
Insert the flange bolts through the vehicle chassis and fixate the mounting plates.
Don't tighten the bolts yet as this will make it harder to slide in the cassette afterwards.
6
Take out the bolts on the side of the cassette.
Only take out the ones that will be used to mount the cassette to the mounting plates. See step 8.
For the second installation situation (see step 1): Take out the bolt that holds the gas spring and re-attach it
after positioning the lift.
MM.8.F04.S
Rev. 0
Situation 2
www.dhollandia.com
page 9/10
Publicité
