Publicité
2
The lift can be mounted in two ways:
1.
Behind the rear bumper.
2.
Integrated inside the rear bumper. Parts of the bumper need to be cut away but the lift will not protrude
beyond the original vehicle dimensions and make it less likely to be damaged by speed bumps etc.
(Recommended) This is only applicable on an L4 version. Contact your Dhollandia distributor in case of any
doubts or questions.
The mounting instructions remain the same for both situations apart from the cutting out of the bumper and the
position of the lift. In the first situation the lift will be placed 200mm further to the back compared to the second
situation.
Situation 1 (L2 – L3 - L4)
MM.8.F04.S
Rev. 0
Situation 2 (L4)
www.dhollandia.com
page 6/10
Publicité
