Publicité
7
Place the cassette on a forklift or electrical transpallet.
Raise the lift so that it sits in front of the mounting plates.
Slide the cassette in between the mounting plates.
8
1.
Position the cassette depending on the installation method you chose in step 1.
2.
Use the already provided bolts that you took out of the cassette to fixate the cassette to the mounting
plates. Tighten the bolts.
3.
Remove the forklift or electrical transpallet.
4.
Tighten all remaining bolts.
5.
Go over every step to make sure you did not forget to tighten any bolts.
These fixations should be tightened with the correct torque. See page 3 for the overview.
Situation 1
MM.8.F04.S
Rev. 0
Situation 2
www.dhollandia.com
page 10/10
Publicité
