Publicité
Both sides of the vehicle
3
Place the fixation plate inside the cut-out in the vehicle chassis.
This plate is not symmetrical, make sure you place it so that the chassis overlaps as much as possible with this
plate.
Do this on both sides.
Both sides of the vehicle
4
Place the mounting plate against the chassis and screw the flange bolts into the fixation plate from step 3.
Do not tighten the bolts completely as small position adjustments still need to be made.
MM.8.F04.S
Rev. 0
www.dhollandia.com
page 8/10
Publicité
