Selve SP 2/15 Notice D'emploi page 19

Setting of the end positions
Functions
Regardless of whether the motor is installed on the right or left, the following rules are
valid:
• Limit switch for upper shutter position, turn adjusting screw (1)
• Limit switch for lower shutter position, turn adjusting screw (2)
• Turning the adjustment screw in the direction of shutter rotation (+) results in a longer
roller shutter path
• Turning the adjustment screw reverse direction of shutter rotation (­) results in a
shorter roller shutter path
Left installation
Adjusting Instructions
1. Move motor with shaft, but without shutter, in the downwards direction until the
motor shuts off automatically.
2. Turn the adjustment screw (2) with the ball­headed adjustment tool until the shutter
can be fixed.
3. Fix the shutter.
4. Move shutter in upwards direction until the motor shuts off automatically.
5. Turn the adjustment screw (1) with the ball­headed adjustment tool until the desired
position is reached.
Right installation
19
EN
EN