Replacing Batteries; Cleaning And Care; Disposal - LIVARNO LUX HG04436A Instructions De Montage, D'utilisation Et Consignes De Sécurité

Replacing batteries

Slide the mounting plate
two battery compartments at the rear centre of the LED light
Fig. F).
Press the handle on the battery compartment slightly toward the
compartment and lift the battery compartment cover
battery compartment.
Remove old used batteries from battery compartment (if applicable).
Insert batteries in the compartment as indicated.
Replace the battery cover to close the battery compartment.
Apply light pressure until the handle locks in again.

Cleaning and Care

Use a dry, soft and lint-free cloth for cleaning and care. Use a
slightly dampened cloth and a mild detergent to remove stubborn
dirt.

Disposal

The packaging is made entirely of recyclable materials, which you may
dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste
separation, which are marked with abbreviations (a) and
b
a
numbers (b) with following meaning: 1–7: plastics / 20–22:
paper and fibreboard / 80–98: composite materials.
and remove from the bracket. There are
7
(see
1
to open the
4
GB/IE/NI 11