Inserting / Replacing Batteries; Cleaning And Care - LIVARNO LUX 107524-14-01 Instructions D'utilisation

The LED torch features 2 light functions which can be acti-
vated by repeatedly pressing the switch
The LED torch features a retaining clip
the shirt pocket when not in use. The clip is furthermore
magnetic, meaning that it can be used to attach the LED
torch to a magnetic surface area. The clip can be turned
by approx. 180 ° in relation to the handle
Never use liquids or cleaning agents, as they may damage
the device.
Only clean the outside of the device, using a soft, dry cloth.
6
107524_LED-Taschenlampe_Content_GB_IE_SE_BE_NL.indd 6
Start-up
Pressing the switch the first time: activates the top
light .
7
Pressing the switch a second time: switches off the
top light and switches on the side light
Pressing the switch a third time: completely switches
off the LED torch.

Inserting / replacing batteries

Turn the battery cover
remove the battery cover (Fig. B).
If necessary, remove the old batteries
Insert the new batteries in the battery compartment.
Only use new batteries of the type specified under
Technical specifications. Please note the polarity when
inserting the batteries. The negative poles of the bat-
teries (flat side) must face toward the spring
battery cover (Fig. C).
Reattach the battery cover and close it by turning it
slightly to clockwise.

Cleaning and Care

Disposal
The packaging is made of environmentally
friendly materials, which may be disposed
of through your local recycling facilities.
GB/IE
6
to fasten it to e.g.
3
slightly to anti-clockwise and
1
9
:
.
8
.
2
(Fig. C).
in the
4
19.11.14 15:18