Description Of The Components; Brief Description Of The Important Features Of The Unit - Klauke mini+ EKM 60/22-L Mode D'emploi

Instruction Manual Crimping tool
EKM 60/22-L EKM 60/22W-L
3. Description of the battery operated electro-hydraulic tool

3.1 Description of the components

The hydraulic tool is a hand guided tool and consists of the following components:
Table 3 (see pic.1)
Pos. Description
1 Crimping head
2 Retract slide
3 LED (red)
4 battery lock
5 Battery
6 LED (white)
7 Trigger
8 Latch
9 Dies
10
Crimping head upper part
11
Retaining clips
EKM 60/22W-L:
11a
Locking pin

3.2 Brief description of the important features of the unit

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the
maximum operating pressure is reached.
HE.14051_B © 11/2010
Function
Working unit to accommodate the dies
slide to retract the drive rolls in case of an error or emergency
Indicator for Battery charge, Service Intervals and faults
Slide to unlock the battery
rechargeable
Optional:
1,3 Ah Li-Ion battery
to illuminate the working area
Actuator to start the crimping cycle
device to open/close the crimping head
interchangeable dies with multiple crimping geometries
to open the crimping head
button to unlock/remove the dies
to lock the W-dies
3Ah Li-Ion battery (RAL2/BL1830)
mains adapter NG2
GB
3