Description Of The Components; Brief Description Of The Important Features Of The Unit - Klauke mini+ Mode D'emploi

Instruction Manual Universal tool
EKM 60UNV-L
3. Description of the battery operated electro-hydraulic tool

3.1 Description of the components

The hydraulic tool is a hand guided tool and consists of the following components:
Table 5 (see pic.1)
Pos. Description
1 Head
2 Retract slide
3 LED (red)
4 battery lock
5 Battery
6 LED (white)
7 Trigger
8 Adapter UAM
9 Locking pin
10 Latch

3.2 Brief description of the important features of the unit

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the
maximum operating pressure is reached.
A manual retraction stop with Teach-in allows the user to programm the stop position during the retraction of the pis-
ton so that the piston stops at the very position where the previous crimping/cutting cycle had been stopped.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp.
The unit is equipped with a special brake which stops the forward motion of the piston/dies when the trigger is re-
leased.
HE.14039_C © 02/2011
Function
Working unit to accommodate the dies
slide to retract the drive rolls in case of an error or emergency
Indicator for Battery charge, Service Intervals and faults
Slide to unlock the battery
rechargeable 1,3 Ah Li-Ion battery
to illuminate the working area
Actuator to start the crimping/cutting/punching cycle
Provides the use of different common crimping dies
only in conjunction with UC40 and UCACSR
Adapter and dies must be locked with this pin prior to operation
Device to open/close the head
Optional: 3Ah Li-Ion battery (RAL2/BL1830)
mains adapter NG2
3
GB