Description Of The Components; Brief Description Of The Important Features Of The Unit - Klauke mini MAP 1 Mode D'emploi

Instruction Manual
MAP 1
4. Description of the battery operated electro-hydraulic pressing tool

4.1 Description of the components

The hydraulic tool type MAP 1 is a hand held tool and consists of the following components:
Table 1 (see pic.1)
Pos. Description
1 Pressing head
2 Retract slide
3 battery lock
4 Battery
5 LED
6 Trigger
7 Jaws
8 Locking pin
9 Lock

4.2 Brief description of the important features of the unit

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the
maximum force is reached.
The unit is equipped with a special brake which stops the forward motion of the drive rolls when the trigger (pic. 1, 6)
is released.
The MAP 1 has a very safe locking system to lock the interchangeable mini jaws.
The locking system for the interchangeable dies which fi t the jaws is very smooth and compact.
Availability of a wide spectrum of MAP jaws and interchangeable pressing dies which are common in the market
since ages.
HE.9843_J © 03/2008
Function
Working unit to accommodate the pressing dies
Bar to open the crimping dies in case of an error or emergency
Slide to unlock the battery
rechargeable NiMH battery 9.6V
Battery charge control and indication of Service Intervals
Actuator to start the crimping cycle
interchangeable pressing jaws with multiple pressing geometries
Pin with special lock to open/close the pressing head
to hold the interchangeable dies in place
3
GB