Accessories - Monogram ZGP484NG Instructions D'installation

Masquer les pouces Voir aussi pour ZGP484NG:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Install the toekick after the range has been leveled.
• Measure the distance between the floor and the
bottom of range.
• Loosen the two screws on each end. Adjust the
toekick height by sliding the upper and lower pieces
apart to 1/8" less than the measured height.
18
Installation
(provided)
Push
• Secure the top and bottom sections by tightening
the 2 screws on each end.
• Push toekick against range leg until clip snaps
to legs.
NOTE: Be sure the toekick snaps securely to the leg.
Top of
Toekick
Bottom
Screw
of Toekick
Push
31-10755-4

Publicité

Table des Matières
loading

Table des Matières