Ux12Bs36Pss, Ux12Bs48Pss Accessory Installation; Optional Accessories-12" High Backsplash; Tools And Materials Required; Install 12" Backsplash - Monogram ZDP366NTSS Instructions D'installation

UX12BS36PSS, UX12BS48PSS Accessory Installation

OPTIONAL ACCESSORIES—12" HIGH BACKSPLASH
This kit provides for the installation of a 12" high
backsplash for 36" Professional Ranges and Rangetops.

TOOLS AND MATERIALS REQUIRED

■ G loves to protect against sharp edges
■ T -15 and #2 Phillips
screwdrivers
■ D rill with 3/32" and
9/64" bits
■ S afety glasses
■ L evel
■ P encil
This Kit Includes
■ W all support panel
■ C over panel
■ H ardware package with
– 5 Stainless Steel Torx 15
#8 self-tapping screws
– 5 Phillips #2 pan head wood
#10 screws
31-2000667 Rev. 1
Wall Support Panel
Cover Panel
Hardware
Package
761Dia65

INSTALL 12" BACKSPLASH

WARNING
This backsplash must be securely
fastened to the wall. Failure to do so could result in
damage or personal injury.
■ I nstall and level the range or rangetop and the
range hood according to the installation instructions.
■ R emove the backsplash packaging and protective
film.
■ U se a level to pencil a horizontal line on the wall, 1/8"
above the range or rangetop. The 1/8" gap allows the
cover panel to overlap the wall support panel.
■ L ocate wall studs on each side. Where studs are not
available, plan to use wall anchors (not provided).
■ A lign the wall support panel on the marked
horizontal line and centered left to right.
■ T he wall support panel must be secured to the wall
at all 4 corners. Use wood screws (provided) or wall
anchors (not provided) to secure the support panel
to the wall.
■ P lace the cover panel over the wall support panel
and secure with Torx screws (provided). Install 2
screws on each side.
Install 4 Wood Screws
1/8"
Wall
Support
Panel
Cover Panel
Wall Support
Panel
Center
Arrow
Install T-15
Screws
Cover Panel
19