Step 2, Move Range Indoors - Monogram ZGP484NG Instructions D'installation

STEP 2 MOVE THE RANGE INDOORS
1 Tilt the range forward on the skid.
2 Lift the toekick out of the foam base.
3 Drive the blade of the hand-truck beneath
the foam block.
IMPORTANT: Do not remove the base foam
block while the hand-truck is in use. Place
the hand-truck blade underneath the base
foam block and transport the range to the final
location.
31-10755-4
Installation
Toekick
Toekick
Insert Blade Under
the Foam Block
You may need to remove the
front of the foam block to fit
through the doorway.
4 Attach the hand-truck straps around the unit.
IMPORTANT: Place the hand-truck straps below
the oven door handles. To avoid damaging the
side panels, place a pad between the hand-truck
and the range.
5 Tilt the range to lower the hand-truck wheels
off the skid.
6 Place the appliance runners on the floor
at the left and right sides in front of the opening.
IMPORTANT: The runners provide a surface for
rolling the range into the final position and will
protect the floor finish. The runners must be
removed before leveling the range.
7 Move the range indoors. Position the range
in front of the installation location, onto
the runners.
Range
Opening
Runners
for Rolling
the Range
Position
Hand-Truck
Straps Below
Oven Door
Handles
into
11