Gazzini 10040370 Mode D'emploi page 23

Select a screw (9, 10 or 11) to suit the given conditions and insert in through the
triple tree from below with the lock washer (8) and a plain washer (5 or 7) and
hold it in place. Put on the second larger plain washer (5 or 7) from above. Fit
either the black (5) or the silver (7) plain washer on the top in accordance with
your taste or the colour of the triple tree.
To raise the handlebars the gazzini Handlebar Clamps can be installed with the
enclosed spacers (4) as necessary. The spacer is placed on the plain washer
(5 or 7). The raised flange faces upwards and enters into the bottom part of the
gazzini Handlebar Clamp (3).
23