en - Programme summary
Place 2–3 belts (safety belts) in each of the padded protective bags provided and close
them.
The protective bags are available to order from the Miele Customer Service Department.
After washing, air-dry the belts. Before drying, roll the leather components through your
hands and, if necessary, treat them with a suitable leather refatting agent to maintain the
elasticity of the leather.
Rescue service workwear is a programme for disinfecting. It is not suitable for washing
garments containing wool as lining material.
Do not wash garments inside out.
Disin. safety clothing*
Fabric
Programme se-
quence
Extras
Dis./proof safety cloth.* /
**
Fabric
Programme se-
quence
Extras
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time and dispensing
quantities) must be set on site to suit cleaning agents and disinfectants.
** The proofing agent must be suited to the special requirements of this area of use.
Rescue service workwear load size
Model
PWM 912
PWM 916
PWM 920
84
60 °C
Nomex and cottons
Pre-wash up to 40 °C
Disinfection* 60 °C, holding time 20 min
2 rinse cycles (optional disinfection rinse can be
activated)
Final spin
Soak, Rinse plus
60 °C
Nomex and cottons
Pre-wash up to 40 °C
Disinfection* 60 °C, holding time 20 min
2 rinse cycles
Proofing bath** 40 °C
Final spin
Soak, Rinse plus
Quantity
Approx. 4 jackets or trousers
Approx. 6 jackets or trousers
Approx. 8 jackets or trousers
Load ratio/ Load
size
see
"Rescue service
workwear load
size" chart