Miele PWM 912 Mode D'emploi page 77

Cloths ch-th disinf 20 min 60 °C
Fabric
Programme se-
quence
Extras
Cloths ch-th dis 10min
+rtu
Fabric
Programme se-
quence
Extras
Cloths ch-th dis 20min
+rtu
Fabric
Programme se-
quence
Extras
Cotton, viscose, polyester and microfibre clean-
ing cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 60 °C, holding time 20 min
3 rinsing baths rinsing bath (optional disinfection
rinse can be activated)
Final spin
Soak, Intensive, Rinse plus, Add agent, Rinse
hold
70 °C
Cotton, viscose, polyester and microfibre clean-
ing cloths
Programme sequence as for Cloths chemo-
thermal disinfection,
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Add
agent, Rinse hold
60 °C
Cotton, viscose, polyester and microfibre clean-
ing cloths
Programme sequence as for Cloths chemo-
thermal disinfection,
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Add
agent, Rinse hold
en - Programme summary
Load ratio/Load
size
PWM 912 – 6.0 kg
PWM 916 – 8.0 kg
PWM 920 – 10 kg
1:18
For number,
see
"Cleaning cloths
load size" chart
77