Miele PWM 912 Mode D'emploi page 70

en - Programme summary
Mops thermal disinfec-
tion
Fabric
Programme se-
quence
Extras
Mops thermal disinf + rtu 90 °C
Fabric
Programme se-
quence
Extras
70
90 °C
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse bath
Second pre-rinse bath can be activated via ex-
tra  "Pre-wash"
Disinfection 90 °C, holding time 10 min
Cool down and/or disinfection rinse can be activ-
ated in the Benchmark tool
3 rinse cycles
Final spin
Pre-rinse, Soak, Water plus, Intensive, Rinse
plus, Add agent, Rinse hold
Cotton, viscose, polyester and microfibre mops
Same programme sequence as Mops thermal
disinfection
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-rinse, Soak, Water plus, Intensive, Rinse
plus, Add agent, Rinse hold
Load ratio/Load
size
1:9
PWM 912 – 12 kg
PWM 916 – 16 kg
PWM 920 – 20 kg
For number,
see
"Mops load size"
chart