Miele PWM 912 Mode D'emploi page 73

The Mops rtu programme is suitable for the subsequent finishing of clean and dry mops.
A disinfecting agent is applied during finishing.
The dispensing quantities must be set on site and the standard of disinfection must be
checked.
Mop load size (cotton) applies to the load ratio 1:9
Mop size/ 40 cm
weight 190 g/
mop
PWM 912 63 off
PWM 916 84 off
PWM 920 105 off
Tip: When using microfibre mops, the load size is higher due to the lower mop weight.
Mop load size (microfibre) applies to the load ratio 1:9
Mop size/weight
PWM 912
PWM 916
PWM 920
A reduced number may apply to particularly high-volume, light-weight mops.
50 cm 60 cm
220 g/ 280 g/
mop mop
55 off 43 off
73 off 57 off
91 off 71 off
40 cm
120 g/mop
100 off
133 off
167 off
en - Programme summary
80 cm 110 cm
360 g/ 510 g/
mop mop
33 off 24 off
44 off 31 off
56 off 39 off
130 cm 160 cm
610 g/ 720 g/
mop mop
20 off 17 off
26 off 22 off
33 off 28 off
50 cm
170 g/mop
71 off
94 off
118 off
73