Miele PWM 912 Mode D'emploi page 76

en - Programme summary
Cloths therm. disinfection 90 °C
Fabric
Programme se-
quence
Extras
Cloths therm. disinf + rtu
Fabric
Programme se-
quence
Extras
Cloths ch-th disinf 10 min 70 °C
Fabric
Programme se-
quence
Extras
76
Cotton, viscose, polyester and microfibre clean-
ing cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 90 °C, holding time 10 min
Cool down and/or disinfection rinse can be activ-
ated in the Benchmark tool
3 rinsing baths
Final spin
Soak, Intensive, Rinse plus, Add agent, Rinse
hold
90 °C
Cotton, viscose, polyester and microfibre clean-
ing cloths
Same programme sequence as Cloths thermal
disinfection
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Add
agent, Rinse hold
Cotton, viscose, polyester and microfibre clean-
ing cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 70 °C, holding time 10 min
3 rinsing baths rinsing bath (optional disinfection
rinse can be activated)
Final spin
Soak, Intensive, Rinse plus, Add agent, Rinse
hold
Load ratio/Load
size
1:18
PWM 912 – 6.0 kg
PWM 916 – 8.0 kg
PWM 920 – 10 kg
For number,
see
"Cleaning cloths
load size" chart