ENGLISH
having successfully operated its levers:
1) Make sure that the parking brake lever (4 fig. 1) is
positioned to "freewheel".
2) Check the oil level in the tank (1 Fig. 6). If a lot of
oil misses, after a bit of work, the machine loses
power due to the high oil temperature.
3) The machine does not proceed straight. Check
that the voltage of both tracks is almost equal. If
necessary, contact our ASSISTANCE Department.
4) The self-loading shovel or the auxiliary outlet do
not work. Check that the gear selection switch (18,
Fig. 1) is set to the slow position.
5) The self-loading shovel is lifted just a little: check
the correct placement of the couplings in the slots.
6) The Dumper does not lift ao much. Before tipping
the Dumper with the self-loading shovel, you must
completely lift the shovel.
46