Seca 684 Mode D'emploi Et Garantie page 91

2
Activating the auto hold
(Ahold) function
2. Confirm your selection.
The last memory used is displayed.
3. You can adopt the memory displayed or select a
PT
different memory.
4. Confirm your selection.
Arrows flash in the display.
The additional weight saved to the selected
memory is displayed.
5. You can adopt the saved value or amend it using
the arrow keys.
NOTE
When you enter the value "0", the function is
switched off. The message "Pt" is no longer
displayed.
6. Confirm your selection.
7. Ask the patient to position him or herself on the
scale.
The patient's weight is displayed.
The saved additional weight has been deducted
automatically.
8. To deactivate the function, select the item "Pt" from
the menu again.
9. Confirm your selection.
The function is deactivated.
You exit the menu automatically.
NOTE
When you switch the scale off, the function is
switched off. The message "Pt" is no longer dis-
played when you switch the scale on again.
When you activate the auto hold function, the measure-
ment result for every weighing operation continues to
be displayed after the weight has been removed from
the scale. It is then no longer necessary to activate the
Hold function manually for each individual weighing
operation.
NOTE
This function is activated at the factory on some
models. You can deactivate the function if
desired.
Before you really get started ... • 91
English