Seca 684 Mode D'emploi Et Garantie page 64

Preventing device
64 •
damage
• Make sure that the patient does not step onto
the weighing platform directly at the edges.
• Make sure that the patient steps onto the
weighing platform slowly and securely.
WARNING!
Danger of slipping
• Ensure that the weighing platform is dry
before the patient steps onto it.
• Ensure that the patients feet are dry before he
or she steps onto the weighing platform.
• Make sure that the patient steps onto the
weighing platform slowly and securely.
ATTENTION!
Damage to device
• Ensure that no liquids enter the device. They
can damage the electronics.
• Switch off the device before disconnecting the
power supply unit from the mains socket.
• Disconnect the power supply unit from the
mains socket if you intend to not use the
device for a longer period of time. Only this
way it can be ensured that the device is cur-
rentless.
• Make sure not to drop the device.
• Do not expose the device to any impacts or
vibrations.
• Perform function controls regularly as
described in the relevant section in this docu-
ment. Do not operate the device if it is dam-
aged or not working properly.
• Ensure that there is no heat source in the
immediate vicinity. Do not expose to direct
sunlight. The excessive temperature could
damage the electronics.
• Avoid rapid temperature fluctuations. When
the device is transported so that a tempera-
ture difference of more than 20 °C occurs, it
must stay turned off for at least 2 hours before
it can be turned on again. Otherwise, conden-
sation water will form which can damage the
electronics.