Publicité
Les langues disponibles
Les langues disponibles
[2] Dolby Pro Logic II mode settings
• Use the Dolby Pro Logic II mode to play program sources with the
channel sources with Dolby Pro Logic II processing.
• One of the following three modes can be selected in the Dolby Pro Logic II mode:
q CINEMA mode: This mode is for use with stereo television shows and all programs encoded in Dolby Surround.
w MUSIC mode: This mode is optimum for stereo music programs.
e PRO LOGIC compatible mode: This is the conventional Dolby Surround Pro Logic mode.
1 1
c 8 1:02:46
1
DVD
TONE
CH
1
2
3
ON
POWER
POWER
CH
VCR
4
5
6
OFF
VCR POWER
VCR POWER
CH
VOL
7
8
9
CLEAR
TV
TV POWER
TV POWER
CH
TV/VCR
SLEEP
CALL
+10
0
DISPLAY
RETURN INPUT MODE SURROUND
1
MENU
FUNCTION
3,5
3,5
ENTER
MODE
VOLUME
BAND
MUTE
CH
SHIFT
NTSC/PAL
STATUS
TU
MEMO
SUB TITLE
AUDIO
ANGLE
TOP MENU
RDS
PTY
CT
RT
PROG/DIRECT REPEAT A-B
REPEAT
RANDOM
CH.SELECT
T.TONE
SDB/TONE
SURR.PARA
2,4
SETUP
CDR/MD/TAPE TUNER/TV/VCR
DVD
REMOCON MODE
All manuals and user guides at all-guides.com
mark and CDs and other 2-
1
Set the surround mode to "AUTO DECODE".
SURROUND
FUNCTION
SURROUND
MODE
/SELECT
\
Main unit
Main unit
Remote control unit
This can be selected when the digital input consists
of no signal, PCM signals, Dolby Digital signals, as
well as when the analog input is selected.
(It cannot be set when Dolby Digital or DTS signals
are being input.)
2
Press the SURR.PARA button on the remote control
unit to display the Dolby Pro Logic II mode setting.
SURR.PARA
PLI I CINEMA
Remote control unit
3
Select the optimum mode according the source.
Remote control unit
PLI I
DOLBY PL
PLI I
CINEMA
PLI I
MUSIC
,
/
4
Set the surround parameters
SURR.PARA
according to the selected
mode.
• The parameters switch as
shown below each time the
Remote control unit
button is pressed.
PL DOLBY PL
PL CINEMA
PL MUSIC
DEFAULT
DEFAULT
PANORAMA
DIMENSION
CENTER WIDTH
DEFAULT
5
Set the various surround parameters.
• PANORAMA setting
PANORA ON OFF
ON
OFF
,
/
The selected setting ("ON" or "OFF") flashes.
• DIMENSION setting
DIMENSION 3
...
...
0
3
6
,
/
• CENTER WIDTH setting
CENTER WIDTH 0
...
...
0
4
7
,
/
• DEFAULT setting
DEFAULT
Y N
YES
Y
N
NO
,
/
• If "YES" is selected, the settings are reset to the
factory defaults.
Stop operating buttons once the surround parameter
settings have been completed.
After several
seconds the normal display reappears and the
settings are automatically set.
This completes the Dolby Pro Logic II mode settings.
Other parameters can also be input, depending on
the input signal. Refer to page 27 for details.
ENGLISH
NOTES:
• The Dolby Pro Logic II mode is stored in the memory
individually for the different functions.
• Dolby Pro Logic II includes four Pro Logic modes:
"NORMAL", "PHANTOM", "WIDE" and "3 STEREO".
These are set automatically by making the "Speaker
settings (setting of speaker type and whether or not that
channel is connected)" in the setup.
• It is not possible to play DTS digital input sources in the
Dolby Pro Logic II mode.
Surround parameters (2)
(Dolby Pro Logic II mode)
CINEMA mode
• This mode is suited for playing movies recorded in
Dolby Surround as well as regular sources recorded in
stereo. A high precision decoder decodes the signals
into 5 channels, resulting in uniform 360 degree
surround sound even with 2-channel sources.
The MUSIC mode may be more effective for sources
containing a high ratio of stereo music. Try both and
choose the most effective mode.
MUSIC mode
• This mode is suited for surround playback of stereo
music signals. The inverted phase signals (the
reverberation component of the music signals
contains a high ratio of these) are played from the
surround channel, and at the same time the frequency
response of the surround channel is optimized to
achieve a natural sound with a sense of expansion.
With music signals, the sound field expansion differs
greatly according to the type of music, the recording
conditions (live, etc.) and the contents of the signal
source. Because of this, the MUSIC mode includes
optional parameters for further adjusting the sound
field.
PANORAMA
The front stereo sound field image is extended to the
surround channel.
This is effective if under normal conditions the stereo
image is narrow and the surround effect seems weak.
DIMENSION
This shifts the center of the sound field image to the
front or surround side.
The playback balance of the different channels can be
adjusted regardless of the amount of reverberation
component in the source. If the sound field image is
biased towards the front or surround side, this
optional parameter can be used to correct it.
CENTER WIDTH
This adjusts the method of playback of the center
signal component from the center channel only to the
front channel only.
When the center channel is played in a way prioritizing
separation, the position of the front channel sound
field is clearer but the overall sound field image
concentrates at the center and the relationship
between the different channels seems weaker. This
parameter can be adjusted to improve the sense of
stability of the sound field image and achieve natural
horizontal expansion.
DOLBY PL (Pro Logic) mode
• This is the conventional Dolby Pro Logic compatible
mode.
In this mode sources recorded in Dolby
Surround are decoded with a playback image faithful
to the original recording.
23
Publicité
