Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
10
SETTING UP THE SYSTEM
(1) System setup items
POWER
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 5 to 8),
VCR POWER
make the various settings described below on the monitor screen using the ADV-700's on-screen display function.
• Use the following buttons to set up the system:
TV POWER
DISPLAY
RETURN INPUT MODE SURROUND
MENU
ENTER
MODE
VOLUME
BAND
MUTE
CH
SHIFT
NTSC/PAL
STATUS
TU
MEMO
SUB TITLE
AUDIO
ANGLE
TOP MENU
RDS
PTY
CT
RT
PROG/DIRECT REPEAT A-B
REPEAT
RANDOM
CH.SELECT
T.TONE
SDB/TONE
SURR.PARA
SETUP
CDR/MD/TAPE TUNER/TV/VCR
DVD
REMOCON MODE
Setup items and default values (set upon shipment from the factory)
Setup
QUICK SETUP
Quick system settings
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
SPEAKER
LARGE for full-size, full-range) to automatically set the
CONFIGURATION
composition of the signals output from the speakers and
the frequency response.
This parameter is for optimizing the timing with which the
DELAY TIME
audio signals are produced from the speakers and
subwoofer according to the listening position.
At the listening position, listen to the test tones output
CHANNEL
from the different speakers and set so that the playback
LEVEL
level from the different speakers is equal.
To select whether composite video signals or S video
AV1 VIDEO
signals or RGB signals will be output from the AV1 SCART
OUTPUT
terminals.
The power automatically switches to standby if no
DVD AUTO
operation is performed for 30 minutes while in the stop
POWER OFF
mode with the function set to DVD.
Set the audio language, subtitle language and disc menu
DISC SETUP
language for when playing discs.
OSD SETUP
Set the wallpaper for the setup and operation screens.
Set the screen size and video system for the TV being
VIDEO SETUP
used.
Set the digital audio signal format and the linear PCM
AUDIO SETUP
sampling frequency and bit conversion.
Make the playback restriction setting for DVDs with
RATINGS
restricted viewing and set the password required for
changing the setting.
Make the closed caption setting for DVDs. (A
OTHER SETUP
commercially available decoder is required to display the
closed captions.)
12
All manuals and user guides at all-guides.com
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
and
:
Use these to move the cursors (
and
on the screen.
and
:
Use these to move the cursors (
and
on the screen.
SETUP button
Press this to display the system setup menu.
Default settings
FRONT SP.
CENTER SP.
SURROUND SP.
SMALL 2.7m (9 ft)
SMALL 2.4m (8 ft)
SMALL 2.1m (7 ft)
FRONT SP.
CENTER SP.
SURROUND SP.
SMALL
SMALL
SW FREQ. = 120 Hz / SW MODE = NONE
FRONT & SW
CENTER
2.7m (9 ft)
2.4m (8 ft)
FRONT L
CENTER
FRONT R
SURROUND R
0 dB
0 dB
0 dB
0 dB
VIDEO OUTPUT
VIDEO
NO (power does not turn off automatically)
DIALOG
SUBTITLE
ENGLISH
ENGLISH
WALL PAPER: BLUE
TV ASPECT
4 : 3 PS
DIGITAL OUT
NORMAL
RATING LEVEL
NO LIMIT
CLOSED CAPTION : OFF
• Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of six speaker systems and a television monitor:
) to the left and right
) to the up and down
Front speaker systems
Set these at the sides of the TV or
screen with their front surfaces as
flush with the front of the screen as
possible.
SUB WOOFER
YES 2.7m (9 ft)
SUB WOOFER
SMALL
YES
SURROUND
2.1m (7 ft)
SURROUND L
SUB WOOFER
0 dB
0 dB
DVD RGB OUTPUT
NO (VIDEO)
DISC MENU
ENGLISH
TV TYPE
PAL
LPCM SELECT
OFF
PASS WORD CHANGE
0000 (Default)
Subwoofer
Center speaker system
Surround speaker systems
Publicité
