Wilo Para MAXO Notice De Montage Et De Mise En Service page 67

Description and function
Technical data
Emissions-sound-pressure level
Max. installation height
Minimum inlet pressure at +95 °C/+110 °C
Table 3: Technical data
1)
with regard to the best efficiency point within the dimensioning conditions.
2)
The values apply up to 300 m above sea level, addition for higher locations:
0.01 bar/100 m increase in height.
NOTICE
See Wilo's technical product catalogue for detailed product features.
5.4 Scope of delivery
ƒ
ƒ
5.5 Accessories
Accessories must be ordered separately. For a detailed list and description, consult
the catalogue.
The following accessories are available:
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
6 Description and function
6.1 Description of the pump
The Wilo-Para MAXO high-efficiency circulators (Fig. I) are glandless pumps consist-
ing of highly efficient hydraulics, an electronically commutated motor (ECM) with a
Installation and operating instructions Wilo-Para MAXO/-G/-R/-Z
< 38 dB(A)
2000 m above sea level
1.0 bar / 1.6 bar (100 kPa / 160 kPa)
High-efficiency circulator
Installation and operating instructions
Mains connection cable
Mains connection adapter Molex SD 5025-03P1
Signal connection cable
Signal connection adapter Wilo-iPWM/LIN
Dummy plug for signal cable
Termination resistor (only for Modbus version)
SSM connection cable
SSM adapter for the connection cable
SSM dummy plug
Thermal insulation shell for heating systems
Thermal insulation shell for cooling systems
1)
en
2)
67