Wilo Para MAXO Notice De Montage Et De Mise En Service page 63

Intended use
NOTICE
For the most common refrigerants, there is an additional pictogram on the product
rating plate to enable fast identification of the possible use of the product:
- R32:
- R290:
WARNING
The Wilo-Para MAXO, Wilo-Para MAXO-G, Wilo-Para MAXO-R and Wilo-Para
MAXO-Z series do not meet the requirements of the ATEX directive and are not
suitable for use in ATEX applications!
Domestic hot water
The high-efficiency circulators in the Wilo-Para MAXO-Z series are suitable for use in
domestic hot water circulation systems and other drinking water applications. In
drinking water applications, the water temperature must not exceed 85 °C.
A list of certificates can be found in the certificate booklet.
Intended use includes compliance with these instructions as well as the information
and markings on the pump.
Any use beyond the intended use is considered misuse and will result in the loss of all
liability claims.
Installation and operating instructions Wilo-Para MAXO/-G/-R/-Z
en
63