Rs232 Interface; Setting Up - Baxtran BC Serie Guide De L'utilisateur

9. RS232 INTERFACE

The scales of the BC series include as an option the RS-232 interface.
ESPECIFICATIONS:
•
Output port RS232 of weighing data
•
ASCII code
•
4800 baud rate
•
8 data bits
•
No parity
CONNECTORS: Type SUB-D of 25 pines
•
PIN 2 Tx
•
PIN 3 Rx (no used)
•
PIN 7 GND
DATA FORMAT
Normal exit;
GS 123,4 Kg
U.W. 123 g
<lf>
<lf>
FORMATO DE DATOS
Printing of memory;
*********
<lf>
TOTAL
Nº5
Weight 123,4 kg
PCS 1000 pcs
<lf>
*********

10. SETTING UP

To enter in the setting up menus you must press the key
Display is going to show the message "Pin" and it will ask you for the password number.
Press the key "0" four times. In the display is going to appear the message " Pin----", now press the key
The Setting Up menu has 7 functions and the user can have access to them by pressing the key
Weight Display is going to show the name of the functions. TO enter in a function the user must press the key
at any time, to weight again.
Refer to the calibration section if you need to know more details.
Establish the phased. Press the key to browse the different options. Press the key
WEIGHT DISPLAY
F1 CAL
F2 dl
F3 Cnt
F4 Au
GS for gross weight, NT for net weight ( with stored tare value)
Kg and g for the metric system and LB for pounds
Includes 2 characters of line changing
Includes 1 character of line changing
Includes 1 character of line changing
DESCRIPTION
Refer to the calibration section for more details
Establish the phased. Press the key
to accept the selection.
Show the internal divisions of the A/D converted. Press the Key
Press the Key to show the options. Select the automatic accumulation (Au ON) when the scale
is stable, or manual accumulation (Au OFF), when the user must press the key
data.
during the initial count of the display, once the device is switched on. The Weight
to accept the selection.
. To browse through the different options. Press the key
USER'S GUIDE BC-BCP
.
to browse through the different options.The
. The user can press the key again,
to go back to the menu.
to accumulate
EN
27