Luminance Brands Kathy Ireland 4th AVENUE LED CF766LBQ00 Mode D'emploi page 6

3. Ceiling Fan Assembly
3.4
Position the Upper Housing, aligning its two Notched
Areas, the Six Screw Holes and the Reverse Switch
Hole onto the Upper Motor Housing Flange (Figure 4) .
3.5
Place the Upper Housing Plate so that the two Notched
Areas align with the two Studs on the Motor Coupler .
Aligning the six Screw Holes of the Upper Housing
Plate onto the Upper Housing .
Securely attach the Upper Housing Plate to the Upper
Housing by using the six #8-32 x 1/2" Pan Head
Screws with Lockwashers (supplied) (Figure 5) .
3.6
Remove the Hanger Ball by loosening the Set Screw
in the Hanger Ball until the Ball falls freely down the
Downrod (Figure 6) .
Remove the Pin from the Downrod, then remove the
Hanger Ball .
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .12 .
NOTE: Do not loosen the Screw holding the Green
Ground Wire.
(Continued)
NOTCHED
AREAS (2)
UPPER
HOUSING
Figure 4
#8-32 x 1/2" PAN
HEAD SCREWS WITH
LOCKWASHERS (6)
Figure 5
PIN
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 6
6
REVERSE
SWITCH
HOLE
MOTOR COUPLER
STUDS (2)
REVERSE
SWITCH
UPPER
HOUSING
PLATE
MOTOR
COUPLER
MOTOR
COUPLER
STUDS (2)
GREEN GROUND WIRE
DOWNROD
HANGER BALL
ETL Model No.: CF766L