Final Assembly - Luminance Brands Kathy Ireland 4th AVENUE LED CF766LBQ00 Mode D'emploi

6.1
Screw the Two Threaded Studs (supplied) into the
tapped holes in the Hanger Bracket (Figure 22) .
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 23) .
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) (Figure 23) .
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod (Figure 23) .
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.

6. Final Assembly

Figure 22
Figure 23
14
HANGER
BRACKET
THREADED
STUD (2)
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
ETL Model No.: CF766L