Setting The Ring Tone Volume - switel DCC632 Combo Série Mode D'emploi

4.10 Abbreviated dialling keys
You can store 3 direct abbreviated numbers M1, M2 and M3 (each up to 24 digits) in the base station.
Saving direct abbreviated dialling numbers (M1 - M2 - M3)
Info: To save a pause in the telephone number, press the pause key 'P' for 2 seconds at the
place where you want to inserted a 3 -second pause. Abbreviated dialling numbers can be
edited or deleted in the same way described for the phone book above. Unassigned
abbreviated dialling keys are displayed as "EMPTY".
Dialling an abbreviated number
4.11 Setting the internal / external ring tone
There are 9 different ring tones available (1 - 9).

4.12 Setting the ring tone volume

4.13 Setting the dialling mode
There are two dialling modes for telephone connections:
G
DTMF / tone dialling (most common)
G
Pulse dialling mode (only necessary if this devices is operated on an older PBX!)
1 Press one of the abbreviated dialling keys.
2 Press OK.
3 Select "NEW ENTRY" and confirm.
4 Enter the name and confirm.
5 Enter the telephone number and confirm.
A confirmation tone is now sounded.
1 Lift the receiver or press the hands free key.
2 Press the abbreviated dialling key. The telephone number is
automatically dialled.
3 Hang up the receiver or press the hands free key again to end the
call.
1 Press the Menu / OK key.
2 Select "RING TONE" and confirm.
3 Select "INTERNAL" for internal calls.
OR
4 Select "EXTERNAL" for incoming external calls.
5 Now select a ring tone (1 to 9) and confirm.
1 Press the Menu / OK key.
2 Select "RING TONE" and confirm.
3 Select "VOLUME" and confirm.
4 Select the required volume (Off, 1-5) and confirm.
1 Press the Menu / OK key.
Operating the telephone
113