switel DCC632 Combo Série Mode D'emploi page 114

Operating the telephone
4.14 Setting the system PIN
Some functions are only available if you know the PIN code for the base station. The PIN code is 4
characters long. The default PIN code is "0000". Proceed as follows to change the PIN code and set
your own PIN:
4.15 Resetting the base station
You can reset all the settings on the base station and delete all entries in the phone book, calls list,
VIP list and redial list. To restore the default settings:
The default settings are:
G
External ring tone 8
G
Internal ring tone 1
G
Ring tone volume 4
G
Keypad beep ON
G
Earpiece volume 4
G
Hands free volume 4
G
Date and time format 24
4.16 The call list
Incoming calls are stored in a calls list (max. 30 numbers) on the base station and the handsets. The
number of missed calls is shown by "X MISSED" (X = number of missed calls) and the flashing CLIP
symbol. Briefly press the calls list key to display the last call.
The telephone number and name of the last caller appear in the display. If the telephone number is
longer than 12 digits, you can show the remaining digits by pressing the key. If the calls list is empty,
the word "EMPTY" appears in the display. The date and time of the incoming call are displayed at the
top right for every call.
114
2 Select "SETTINGS" and confirm.
3 Select "DIAL MODE" and confirm.
4 Select "TONE" or "PULSE" and confirm.
1 Press the Menu / OK key.
2 Select "SETTINGS" and confirm.
3 Select "SYSTEM PIN" and confirm.
4 Enter the "OLD PIN-" and press OK.
5 Enter the "NEW PIN-" and confirm.
1 Press the Menu / OK key.
2 Select "RESET" and confirm.
3 Press OK to confirm.
4 Enter the PIN code (0000) and confirm.
Important: All the stored data (redial, phone book, call list, abbreviated numbers) will be
deleted.
Important: The "caller ID" (CLIP) feature is only available if it is activated for your line.
Contact your telephone line provider for additional information.