Lighting The Burner; Aladdin Burner - Sibir V110 Mode D'emploi

PREPARAtIoN bEFoRE lIghtINg
8 Unpack burner glass, sealing ring and fit them to
the burner.
9 Fit the burner into the tank. When fitting the Kos-
mos burner use a tank adapter.
10 Fit the control shaft on the tank to the wick turner.
11 Fill the tank with the best quality household
kerosene. The level indicator shows the kerosene
level.
12 Wipe the tank dry from kerosene if any has spilt.
13 Allow the burner to soak for at least 2 hours be-
13
fore lighting.
13

lIghtINg thE buRNER

AlAddIn bURneR

1 Remove the gallery together with the lamp glass and sealing ring by
1
turning it anti-clockwise.
2 Adjust the wick to a height you can see, about 2–3 mm (0.08-0.12").
www.sibir.com
!
To speed up the soaking, the burner could be taken out,
the wick turned up and placed up side down into a bowl
of kerosene for 15 minutes.
Kosmos burner
Sealing ring
Glass
Burner
Wick Turner
Aladdin burner
Cleaner
copyright © sibir international
6
1