Cleaning And Trimming The Wick; Aladdin Burner; Kosmos Burner - Sibir V110 Mode D'emploi

clEANINg ANd tRImmINg thE WIcK

AlAddIn bURneR

1 Remove the tank.
2 Remove the gallery. Turn it anti-clockwise and lift.
3 Take out the flame spreader.
3
4 Insert the wick cleaner (supplied with the burner) in the burner tube.
5 Adjust the wick to press gently against the wick cleaner.
6 Turn the wick cleaner carefully clockwise.
6
7 If the wick cleaner is missing, use a razor blade or a pair of scissors.
8 The top surface of a perfectly cleaned wick should be even and free from
carbon and frays.
9 blow the wick and burner clean.
10 Assemble the burner and fit into the tank.
!
· Do not fray the wick.
· Do not cut away more than necessary.

KoSMoS bURneR

1 Remove the tank.
2 Remove the lamp glass with insert.
3 Clean the wick surface with your fingers in order to
3
get it even and free from carbon.
4 If not possible to use fingers, trim with a razor blade.
5 blow the wick and burner clean.
6 Assemble the burner and fit it into the tank.
www.sibir.com
3
3
Even
12
Flame
spreader
6
Not even
copyright © sibir international