Bose SOUNDLINK REVOLVE II Mode D'emploi page 28

Pair the speakers manually
If you are unable to access the Bose Connect app, follow the instructions below.
Party mode
1. Make sure both speakers are powered on.
2. Make sure a speaker is connected to your mobile device.
3. On the speaker connected to your device, press and hold the Bluetooth button l
and H simultaneously.
4. Release the buttons when you hear "Press the Bluetooth and volume down
buttons simultaneously on a second Bose device."
5. On the other speaker, press and hold l and z simultaneously.
6. Release the buttons when the speaker emits a tone.
After 10 seconds, you hear "Party mode" from both speakers simultaneously. Party
mode is enabled. You are now able to play audio in unison using your device.
7. For an optimal experience, position your speakers:
• In the same room or outdoor area
• So there are no obstructions between them
NOTE: Performance may vary based on mobile device, distance and
environmental factors.
PA I R BOSE P R O D UC TS
|
2 8 E N G